Pillar-Tools-logo_positive
View Cart
  1. Home
  2. Product Information

Product 'How To' Information

  • How to Set-Up Harness
  • Fruit Picking Bag + Harness + Belt">Lumber Support Belt Set-Up

    • 1. Place the Lumber Support Belt around the waist midway between the hip bone and rib bone – Connect buckle. Front adjust Buckles: Set webbing adjustment to 10 cm from nylon adjust Buckles to Steel Clips. (Factory setting)

    2. Adjust the buckle to a very ‘FIRM’ fit.

    3. Allow 20cm – 30 cm of surplus belt after adjustment for future adjustment. Cut off the surplus with scissors. Melt the raw edge with a lighter or match to seal material. Discard the off-cut into an appropriate refuse.

  • Final Set-Up and Operation Check List

    • 1. Once the Lumber Support Belt has been firmly adjusted to your waist, place the fruit Picking Bag Assembly over your head, Check all adjustments and security and comfort of fit.

    2. Simple check list:

    a. All steel clips sitting correctly on loops

    b. Top of bag height at the elbow

    c. The bag should sit ‘up’ on a slight angle.

    d. Side straps nice and firm

    e. Shoulder pads slightly loose at shoulder.(not a firm fit) To allow for free arm raise movement.

    f. Pull down front clip cover pads as low as they can go on the webbing.

    g. Side ‘Bib’ straps locating ‘Rings’ secure on No. 1 loops.
  • Basic Operation

    • 1. To re-connect the Front Bib Steel Side Rings. You must connect each side Ring Separately. One side then the other side. This is important to keep the picking operational speed high. Example: Connect the Left Bib side steel ring, pull hard on the right side Bib loop strap. Now connect the Right side steel ring. Use this same principle when lowering the side straps to Ring No. 2. One at a time. NOTE: The ring locating ‘PIN’ angle can be adjusted. See your supplier.

    2. Under the COVID, Health & Safety recommendations. Use Anti-Viral spray on the Harness before each days operation. The Harness should be removed from the Bag weekly and laundered in warm water with added disinfectant. Allow to Dry naturally.
Product Information
PillarTools-6of1-copy
PillarTools-7of1-copy
Customer Information Shipping Your Account Returns Warranty Terms and Conditions Fruit Picking Bag Harness Set-Up
Company Information About Us Commercial Customers
Newsletter
SIGN UP! to receive special offers and promotions
Pillar Tool Co. | Horticultural Tool Specialist (NZ) +64 (0)21 332 221

© 2018 Pillar Tool Co. All rights reserved. Powered by ShopSite Shopping Cart Software                                                                                                                                                  Terms and Conditions

credit-cards-accepted